Flow characteristics of labyrinth weirs: A review

DOI registering

Authors

  • Aysar Tuama Al-Awadi Civil Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq
  • Layth Abdulameer Civil Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq
  • Mudhar Al-Obaidi Technical Instructor Training Institute, Middle Technical University, Baghdad, Iraq Author
  • Mushtaq Abdalrahem University of Al-Ameed, Karbala, Iraq; Department of Statistics, College of Administration and Economics, University of Kerbala, Karbala, Iraq
  • Mahmoud Saleh Al-Khafaji Department of Water Resources, College of Engineering, University of Baghdad, Al-Jadriya -Baghdad, Iraq
  • Farhan Lafta Rashid Petroleum Engineering Department, College of Engineering, University of Kerbala, Karbala, Iraq

DOI:

https://doi.org/10.13167/2026.33.11

Keywords:

labyrinth weirs, discharge coefficient, geometric parameters, computational fluid dynamics, artificial intelligence

Abstract

Labyrinth weirs are widely used in hydraulic engineering, offering enhanced discharge capacity and operational efficiency compared with traditional linear weirs. This review systematically examines the flow characteristics, geometric parameters, and hydraulic performance of labyrinth weirs, highlighting their critical role in modern water management systems. Key findings reveal that sidewall angles between 10° and 20° have higher discharge coefficients (Cd), while rounded crest shapes (e.g., half-round) were found to improve efficiency by up to 20 % compared to sharp or flat crests. The height-to-width ratio (P/w) significantly influences performance, with optimal ranges of 2-4 for trapezoidal weirs. Under free-flow conditions, labyrinth weirs achieve discharge capacities up to 67 % higher than linear weirs, though nappe interference was reported to reduce efficiency by 4-10 % at higher heads. Recent advancements integrate Computational Fluid Dynamics (CFD) and Artificial Intelligence (AI) have improved Cd prediction accuracy by 5,0 to 18,8 % for modified geometries. Despite progress, gaps remain in standardised design guidelines and the application of AI for site-specific optimisations. Future research should focus on sustainable materials, smart technologies, and advanced computational techniques to further enhance the resilience and efficiency of labyrinth weirs in addressing contemporary water management challenges.

Downloads

Published

2026-11-19

Issue

Section

Articles

How to Cite

Flow characteristics of labyrinth weirs: A review: DOI registering. (2026). Advances in Civil and Architectural Engineering, 17(33), 186-212. https://doi.org/10.13167/2026.33.11

Similar Articles

1-10 of 11

You may also start an advanced similarity search for this article.